Description
** THIS IS A PDF PATTERN. YOU WILL RECEIVE A LINK TO DOWNLOAD THE DIGITAL FILES IN YOUR CONFIRMATION EMAIL AFTER PURCHASE**
Did you know we can print out this pattern on A0 paper and post it to you?
- If you would like us to print out this pattern for you, add this pattern to your cart, then click here.
- It will then ask you how many pages your pattern has. This pattern has 2 PAGES.
- This pattern has been drafted for FOUR height ranges: #1 = 154-160cm, #2 = 162-168cm, #3 = 170-176cm, #4 = 178-184cm
- In the comments section, let us know which of the four height ranges you require
- You do not need to upload the pattern file.
For more information about PDF pattern printing check out our PDF Guide.
** PLEASE NOTE: THIS PATTERN HAS BEEN DRAFTED FOR FOUR HEIGHT RANGES, ALL ARE INCLUDED IN THE PURCHASE **
This pattern purchase includes the following files: instructions, A4 print-at-home pattern, A0 copy shop pattern, and plotter pattern for large format printing on a roll.
Cynthia is an oversized loose fit blouse. The back yoke is lined and forms part of the front panels. There’s an inverted box pleat at the back. It has a classic collar with stand and a center front placket with buttonholes. It features a dropped shoulder and a long shirt sleeve which has pleats and a slit at the bottom and is finished with a buttoned cuff. The hem is uneven, being higher at the front and longer at the back. The length of this blouse is mid-thigh.
Suggested Fabric
-
Medium weight, with good drape, breathable, soft, non-stretch or with very little stretch, opaque
-
The fiber content can include natural fibers (wool, silk, cotton, linen), artificial (viscose), blends (Tencel + cotton, cotton + polyester, cotton + viscose, etc), synthetic fibers (polyester, polyester + elastane)
-
The following fabrics are recommended: shirting, dress weight cotton, linen, poplin, lightweight denim, cupro, viscose, modal, babycord
Attention! We do not recommend stretchy knit materials and lightweight sheer fabrics (chiffon, organza, stretch lace).
Fabric Requirements
1.Main fabric, 140cm wide, with a directional print and nap, in meters
Height/Size
{sizes table}
Important! When purchasing fabric please account for shrinkage by purchasing 5% more than the above requirement.
Main fabric, 110cm wide, with a directional print and nap, for cutting in 2 stages (first folded, then open), in metres
{sizes table}
2. Lightweight fusible woven knit interfacing, 140cm wide for all sizes: 70-85cm depending on chosen height
3. 13 buttons 0.7cm in diameter
4. Matching thread – 5 spools (1 spool for sewing machine and 4 for overlocker)
Equipment
-
Sewing machine for construction
-
Overlocker for finishing raw edges. This may be replaced with a stretch overlock stitch or a zigzag stitch on your sewing machine (overlock or zigzag stitch width 2-3mm, stitch length 2.5mm)
-
Special buttonhole foot for your sewing machine
