null

Vikisews Candice Trousers PDF (Intermediate)

£10.00
(No reviews yet) Write a Review
Pattern Format:
PDF
Vikisews | Candice Trousers | Fabric Godmother

Description

** THIS IS A PDF PATTERN. YOU WILL RECEIVE A LINK TO DOWNLOAD THE DIGITAL FILES IN YOUR CONFIRMATION EMAIL AFTER PURCHASE**

Did you know we can print out this pattern on A0 paper and post it to you?

  • If you would like us to print out this pattern for you, add this pattern to your cart, then click here.
  • It will then ask you how many pages your pattern has. This pattern has 2 PAGES.
  • This pattern has been drafted for FOUR height ranges: #1 = 154-160cm, #2 = 162-168cm, #3 = 170-176cm, #4 = 178-184cm
  • In the comments section, let us know which of the four height ranges you require
  • You do not need to upload the pattern file.

For more information about PDF pattern printing check out our PDF Guide. 

** PLEASE NOTE: THIS PATTERN HAS BEEN DRAFTED FOR FOUR HEIGHT RANGES, ALL ARE INCLUDED IN THE PURCHASE **

This pattern purchase includes the following files: instructions, A4 print-at-home pattern, A0 copy shop pattern, and plotter pattern for large format printing on a roll.

Candice is a pair of close-fitting flared trousers. There are slash pockets on the front, as well as a yoke and patch pockets on the back. Each of the back legs is made up of two pieces and has a seam at the knee level. The waistband features topstitched belt loops. The upper edge of the waistband sits at the natural waistline. The trousers have a fly front zipper closure. The waistband fastens with a set-in snap. The trousers feature decorative topstitching along the pockets, waistband, belt loops, crotch and side seams. Candice is below-ankle length.

Suggested Fabric

  • medium weight, soft, low or medium stretch

  • the coating can be made from polyurethane, polyurethane foam and polyvinyl chloride

  • the fiber content of the backing can include natural fibers (cotton), artificial fibers (viscose) and synthetics (polyester)

  • the following fabrics are recommended: faux leather, faux suede with a woven or suede backing, real leather

The trousers in the photo are made of faux leather. The fabric is medium weight, pliable, soft and with very little stretch. The fiber content is a blend: 45% polyurethane and 55% viscose. The fabric weight is 360 g/m2.

FABRIC REQUIREMENTS

  1. Main fabric

  1. Interfacing, 50 g/m2

IMPORTANT! When purchasing fabric, please account for shrinkage and buy 5% more than required.

  1. Lining fabric, 140 cm (55") wide, with a directional print — 0.3 m (3/8 yd)

  2. One closed-bottom metal zipper No. 5, 20 cm (7 7/8") long, for all sizes in all heights

  3. Two top zipper stoppers for adjusting the zipper length

  4. Stitched straight-grain fusible stay tape, 1 cm (3/8") wide — 3 m (3 1/4 yd)

  5. Paper-backed fusible web tape, 1 cm (3/8") wide — 10 m (10 7/8 yd)

  6. Double-sided adhesive tape, 1 cm (3/8”) wide — 2 m (2 1/8 yd)

  7. One set-in snap, 0.7–1 cm (1/4–3/8”) in diameter

  8. Matching thread — 5 spools (1 spool for the sewing machine + 4 spools for the overlocker)

  9. Matching topstitching thread (for example, Madeira No. 35) — 1 spool

EQUIPMENT

  • sewing machine for construction

  • overlocker for finishing raw edges of the slash pocket lining. It can be replaced with a stretch overlock stitch or a zigzag stitch on the sewing machine (overlock or zigzag stitch width 2–3 mm, stitch length 2.5 mm)

  • stitch-in-the-ditch foot for the sewing machine (optional)

  • one-sided foot for the sewing machine to attach the zipper

  • teflon or walking foot for the sewing machine

  • press tool for installing snaps

women-sizing-34-52.jpg