Description
** THIS IS A PDF PATTERN. YOU WILL RECEIVE A LINK TO DOWNLOAD THE DIGITAL FILES IN YOUR CONFIRMATION EMAIL AFTER PURCHASE**
Did you know we can print out this pattern on A0 paper and post it to you?
- If you would like us to print out this pattern for you, add this pattern to your cart, then click here.
- It will then ask you how many pages your pattern has. This pattern has 3 PAGES
- This pattern has been drafted for FOUR height ranges: #1 = 154-160cm, #2 = 162-168cm, #3 = 170-176cm, #4 = 178-184cm
- In the comments section, let us know which of the four height ranges you require
- You do not need to upload the pattern file.
For more information about PDF pattern printing check out our PDF Guide.
** PLEASE NOTE: THIS PATTERN HAS BEEN DRAFTED FOR FOUR HEIGHT RANGES, ALL ARE INCLUDED IN THE PURCHASE **
This pattern purchase includes the following files: instructions, A4 print-at-home pattern, A0 copy shop pattern, and plotter pattern for large format printing on a roll.
Abbie is a semi-fitted jacket with a straight silhouette. The front features bust darts transferred to the bottom edge and shoulder seams. The bust darts transferred to the bottom edge are designed as princess seams with pockets in them. The center front edge is finished with a decorative placket. The jacket closes with a separating zipper that has a windproof placket backing. The back is fitted with darts at the bottom edge. The jacket has a turn-down collar with a separate collar stand and long, set-in, semi-fitted, two-piece sleeves with a slight flare towards the bottom. Abbie is above-hip length.
Recommended materials
To sew this jacket, choose medium pile faux fur with the following properties:
-
medium weight, structured, non-stretch or with very little stretch
-
the fiber content can include natural fibers (wool), blends (wool + polyester), and synthetics (polyester)
-
the following fabrics are recommended: faux fur with knit backing, faux fur with woven backing, napped coating fabrics, bouclé fabrics
Attention! We do not recommend using thin coating fabrics or faux fur that doesn't hold its shape.
As an additional fabric, we recommend using non-stretch fabrics, such as outerwear fabrics, faux leather, and faux suede.
For the lining, choose lining fabrics made of artificial fibers (viscose), blends (viscose + elastane, viscose + polyester), or synthetics (polyester, polyester + elastane).
The jacket in the photo is made of faux fur with a knit backing. The fabric is medium weight, structured, and low-stretch. The fiber content is a blend of wool and polyester. The fabric weight is 400 g/m2.
The placket and inner placket pieces are made of outerwear fabric. The fabric is medium weight and non-stretch. The fiber content is 100% polyester. The fabric weight is 150 g/m2.
The lining is 100% viscose.
Fabric requirements
-
Main fabric
-
Additional fabric
-
Lining fabric
-
Interfacing
IMPORTANT! When purchasing fabric, please account for shrinkage and buy 5% more than required.
-
Alpolux 100 g/m2 insulation material, 150 cm (59") wide — 0.1 m (1/8 yd)
-
Stitched bias-cut fusible stay tape with stitch reinforcement, 1 cm (3/8") wide — 5 m (5 1/2 yd)
-
One #7 separating zipper, 60 cm (23 5/8") long, for all sizes in all heights
-
Two top zipper stoppers for adjusting the separating zipper length
-
Matching thread — 1 spool
Equipment
-
sewing machine for construction
-
one-sided zipper foot for the sewing machine
